Sourcing
What a Home Textile Order Costs to Make, and Why Price Falls With Quantity
Published
The price of a home textile is the cost of its cloth, its making and its finishing, plus a share of the work done once for the whole order: setting up the loom, dyeing the lot, sampling and cutting. Order more pieces and that once-only work is spread across more of them, so the price per piece falls. The largest saving, though, comes from weaving the cloth to the size of the finished product, because cloth that is never cut away is cloth you do not pay for.
This guide sets out what a price is made of, what changes at 100, 500 and 2,000 pieces, and how to bring a price down without changing the quality. It gives no figures, because a figure only means something against a specification. For how one product's price divides up, see where the money goes in a linen sheet set.
What a price is made of
Every quote for bed linen, table linen or cushions is built from the same parts:
- Yarn and weaving. The fibre, the yarn count and the density of the weave. In linen this is the largest part of the price.
- Dyeing and finishing. Piece dyeing or yarn dyeing, then washing and softening.
- Cutting and sewing. Hems, corners, closures and the time each takes.
- Decoration. Embroidery, print, hemstitch, quilting or trims, where the design has them.
- Labels and packing. Woven labels, swing tags, inserts, bags and cartons.
- Freight, if the quote includes it. FOB covers the goods to the port; CIF and CFR add the sea freight.
Some of these parts are paid for by the metre or by the piece. Others are paid for once per order, per cloth or per colour. That difference is what makes quantity matter.
Why the price changes at 100, 500 and 2,000 pieces
Work that is done once
A loom is set up once for a cloth, whether it then weaves two hundred metres or two thousand. A dye lot is prepared, matched and approved once. A design is sampled, measured and graded once. At 100 pieces each piece carries a large share of that work. At 2,000 the same work is divided twenty times further.
The dye lot
Dyeing has its own minimum, because a dye vessel has to be filled to dye evenly. A small order in a custom shade fills it poorly, so the cost of the lot sits on fewer metres. This is why the minimum is set per quality and per colourway and not per size: from 100 pieces on woven goods and 50 on knitted, split across sizes as you like.
Cutting
Pieces are laid out on the cloth before cutting. A longer run gives more ways to fit them together, so less cloth is left over between pieces. On a short run the same offcuts are a larger share of the cloth you bought.
| Part of the price | 100 pieces | 500 pieces | 2,000 pieces |
|---|---|---|---|
| Yarn and weaving | Highest per piece | Lower | Lowest |
| Loom set-up and sampling | Carried by few pieces | Spread wider | Barely felt |
| Dyeing | Small lot, costly per metre | Fuller lot | Full lots |
| Cutting waste | Highest share | Lower | Lowest |
| Sewing and decoration | Per piece | Per piece, a little quicker | Per piece, quicker again |
| Labels and packing | Per piece | Per piece | Per piece |
Sewing, labels and packing are paid for piece by piece, so they fall least. The cloth and the once-only work fall most.
Weaving to the size of the product
The step that saves the most is one a buyer rarely sees. When the order is large enough to weave cloth for it, we weave that cloth to the width the finished product needs, not to a standard width that is then cut down.
A sheet, a duvet cover or a tablecloth has a finished width. If the cloth is woven a little wider than that, with only the hems to spare, almost nothing is cut away. If the same product is cut from a stock width, a strip is lost along every length, and that strip was spun, woven and dyed like the rest. Our looms weave up to 136 inches (345 cm) wide, so wide products such as king size sheets and long tablecloths are cut from one width, without a joining seam to sew or to match. The guide to loom width and seamless bedding explains why that width is unusual.
This is the real reason a price improves with quantity. Below a certain run, a cloth has to be shared with other orders or cut from what is already woven. Above it, the cloth is planned around your product: its width, its sizes and its colours. Less is wasted, and what is not wasted is not charged.
How to bring the price down
- Fewer colours, more pieces in each. Six hundred pieces in one colour cost less per piece than six hundred across six, because each colour is its own dye lot.
- One cloth across several products. Sheets, pillowcases and a duvet cover in the same quality, or napkins, runners and a tablecloth in the same cloth, share one weaving and one dyeing.
- Sizes that suit the width. Tell us every size you need at the start, so the cloth width can be set to cut them all with the least waste.
- Keep decoration to where it shows. An embroidered border costs less than an all-over design and often reads as well.
- Plan the repeat. A reorder carries no new sampling, and a planned programme lets cloth be woven in longer runs. See what changes between a first order and a repeat.
Where a small order is still the right choice
A lower price per piece is not a reason to order more than you can sell. A first order of 100 pieces in two colours tests a range with real customers, and what it teaches is worth more than the saving on a larger run that sits in a warehouse. The sensible path for most new ranges is a small first order, then a larger repeat in the colours that sold. When two quotes for the same product differ, quantity is only one of the reasons, and why two suppliers quote differently covers the others.
Common questions
Why is the price per piece higher for 100 pieces?
Because setting up the loom, dyeing the lot and sampling the design are done once whatever the quantity. At 100 pieces each piece carries a larger share of that work, and more of the cloth is lost in cutting.
Does ordering more always lower the price?
It lowers it most between a small order and the point where cloth is woven for your product alone. Beyond that the price keeps easing, but more slowly, because sewing, labels and packing are still paid for piece by piece.
Is the minimum set per size or per colour?
Per quality and per colourway, from 100 pieces on woven goods and 50 on knitted. It is not set per size, so one minimum can be split across several sizes in the same cloth and colour.
How do I get a price for my quantities?
Send the products, sizes, cloth, colours and the quantities you are weighing up. We quote each quantity side by side so you can see where the price moves. Request a quote with your specification.