Sourcing
Reorders: What Changes Between a First Order and a Repeat
Published
A reorder is usually faster and cheaper to set up than a first order, because the specification, colour approval and sampling already exist. It is not a photocopy, though: yarn lots, dye lots, minimums and production slots all move between orders, and the buyers who get matching goods are the ones who fixed those points in writing the first time.
What a first order carries that a reorder does not
A first order has to establish everything. Someone writes the specification, a counter sample is made and approved, colours are matched and signed off, packing and labelling are agreed, and a production slot is found. A reorder inherits most of that work.
| Stage | First order | Reorder |
|---|---|---|
| Specification | Written and agreed | Reused, confirmed unchanged |
| Counter sample | Made, shipped, approved | Usually not repeated if nothing changes |
| Colour | Lab dip or strike-off approved | Approved shade reused, with a standard to match against |
| Packing and labels | Agreed from scratch | Reused from the file |
| Production slot | Booked after approval | Booked against the supplier's current load |
The saving is mostly in the front end. The production itself still takes the time it takes, and a reorder does not skip it.
Lead time: why a repeat is not automatically quicker
Buyers often assume the second order ships faster. Sometimes it does, because sampling is out of the way. But the part that dominates the calendar is raw material and production, and that depends on what the supplier has booked at the moment you ask.
For H & J Exim, bulk production starts from 60 days FOB after sample approval on a first order. That figure is the starting point for planning, and your own confirmation for a given repeat should come from the supplier in writing, quoted against the actual quality and quantity. Treat any promise of a fixed "reorder lead time" with caution until it is attached to a specific order.
Two clocks matter here, and they are easy to confuse: the time to make goods and the time to move them. The guide on lead time against transit time separates them.
Order before you need to
The practical rule is to place the reorder when stock reaches a trigger level, not when it runs out. Work backwards from the date you want the goods on shelf: transit, loading, production, and any approvals. Add a margin. A repeat that arrives two weeks after a sell-out is an expensive repeat.
What can drift between orders
Even with an identical specification, four things tend to move.
Colour
Dye lots are not identical from one run to the next. A shade approved in a lab dip is a target, and each bulk lot lands within a tolerance of it. If your first order was approved against a lab dip, keep the approved sample as a physical standard and ask for the reorder to be matched to that, not to a description. Pantone TCX references help, but the physical approved piece settles disputes. Colours on screen are indicative only.
Where a product is sold as a matching set across several orders, such as sheets today and pillowcases in three months, ask for lots to be checked against each other before packing.
Yarn and fabric lots
Natural fibres vary by harvest and by lot. Linen and cotton both show it, in hand feel, slub character and shade. A quality that is "the same" on paper can feel slightly different if the yarn comes from another lot. This is normal for natural fibre, and a supplier who says it never happens is not describing real cloth. Agree an approved handfeel and appearance standard from the first bulk, not only a number on a spec sheet.
Minimums
Minimums are set per quality and per colourway, and they can differ between a first order and a repeat depending on how the cloth is planned. H & J Exim's minimum is from 50 pieces, with knitted from 50 and woven from 100, set per quality and per colourway rather than per size, so a minimum can be split across sizes. If a repeat adds a new colourway or a new quality, that new line carries its own minimum.
Specification creep
The most common source of mismatch is not the supplier. It is a small change made by the buyer between orders: a different label, a slightly different size, a new packing method, a different fibre blend. Each is reasonable alone. Together they mean the "repeat" is a new product, and it should be treated as one, with a fresh sample.
What to lock down in the first order
If you expect to repeat, settle these before the first bulk ships.
- A signed specification. Fabric, construction, size, finish, packing and labelling, all in one document the supplier also holds.
- A retained physical standard. The approved counter sample, and the approved colour piece, kept by both sides.
- A reference for the order. Quote the same quality and colour names on every purchase order so nothing is re-described.
- A tolerance statement. What variation in shade and size you will accept, written down before there is a dispute.
- Records of any change. If anything is altered, note it, and ask whether a new sample is needed.
Buyers building a private label range will find the terms for minimums, sampling and approvals set out on the private label page.
When a repeat should be re-sampled
Skip the new sample when the specification, the cloth and the colour are all unchanged. Ask for one when you change the fibre, the construction, the size, the finish or the colour, or when the gap between orders is long enough that you want to confirm the cloth against your standard before committing a full quantity. A new sample costs days. A mismatched container costs far more.
Sampling on H & J Exim woven goods takes about one week and on knitted about 10 days, from an agreed specification. Samples are chargeable and adjusted against the first bulk order.
A concession
For a very small or one-off line, a formal reorder process may be more than you need. If you buy a single seasonal product once a year, keeping the spec and a retained sample may be all the structure it deserves. The discipline above pays back as volume and repeat frequency rise.
Common questions
Is a reorder cheaper than a first order?
Setup costs are usually lower because sampling and colour approval are done, but this depends on the supplier and on whether anything has changed. Ask for the reorder quoted against the same specification, and confirm in writing what is carried over.
Will a reorder match the first order exactly?
It should match within an agreed tolerance, not perfectly. Dye lots and natural fibre lots vary. Keeping a physical approved standard and a written tolerance is the best protection.
How far ahead should I place a reorder?
Work back from the date you want stock on shelf, adding transit, production and approval time, then place the order before stock hits your trigger level. Confirm the production lead time for each specific repeat with the supplier, as it depends on current load.
Do I need a new sample for a reorder?
Not if the specification, cloth and colour are unchanged. If any of them changes, or a long gap has passed, request a fresh sample before committing to bulk. To discuss a repeat programme, contact us.