Fabrics
Linen Curtains: Weight, Lining and Why Fabric Width Matters
Published
Three decisions shape a linen curtain: the weight of the cloth, whether and how it is lined, and the width of the fabric it is cut from. Weight sets how the curtain hangs, lining changes body and how the fabric ages in a window, and cloth width decides whether a full-height panel can be cut without a horizontal seam. Settle all three on a sample before bulk, because linen behaves differently from a cotton or polyester curtain cloth in each.
Weight: what it does to the hang
A heavier linen falls in a straighter, more deliberate column. A lighter one moves, billows and catches the light. Neither is better; they suit different rooms and different headings. For the actual weight bands by product, including sheers and medium drapes, see Linen Weight by Product. This guide covers what the choice does in practice.
| Cloth character | How it hangs | Suits | Watch for |
|---|---|---|---|
| Light, open linen | Soft, moves in air, gathers loosely | Sheers, café curtains, relaxed eyelet or rod-pocket headings | Shows slubs and uneven yarn, hems can look puckered if not pressed |
| Medium linen | Clean folds with some movement | The widest range of retail curtains, pencil pleat and wave headings | Needs enough fullness or it reads flat |
| Heavy, dense linen | Stiff, structured fall, holds a pleat | Formal pinch pleat drapes, floor-length panels | Needs a track or pole that carries the load, and more cloth per metre costs more |
Linen is also a fibre with very little stretch. A cotton curtain relaxes a little under its own weight. Linen mostly does not, but it can lengthen slightly in humid rooms and recover when dry. So a long drop in linen should be specified with a hem allowance and a tolerance, not an exact finished length. The same logic applies to shrinkage on first wash, which is covered in How Much Does Linen Shrink.
Lining: what each option changes
Lining is a construction choice. It is not a performance promise. Whatever a lining does for light or temperature is a separate tested claim, and weight and lining alone do not deliver it. Specify the construction, and let the buyer's market set any requirement beyond that.
- Unlined. The linen is seen as woven, with light passing through the weave. It is the lightest and cheapest option, and the most honest showing of slubs. It also takes the full weather of the window, so the face fabric ages fastest.
- Lined. A second fabric, often cotton or a cotton blend, is sewn to the back, usually hung loose behind the face fabric. It gives the curtain body, protects the linen face from the window, and makes the back of the curtain look finished from outside.
- Interlined. A soft layer sits between face and lining. It adds weight and a fuller fold, and makes the curtain heavier to make and to hang.
A few points worth writing into the spec:
- Lining shrinks differently from the face. Pre-washed or pre-shrunk linen with an unwashed cotton lining will pull out of true. Agree shrinkage tolerance on both, and test the made curtain, not just the cloth.
- Lining colour shows. A white lining behind a deep linen shows at the edges and in the light. Many buyers match it to the face or use a neutral shade. Our palette, and the lab dip process that confirms a shade, are covered in How Colour Matching Works.
- Fading belongs to the window, not the fibre alone. Strong sun fades dyed cloth over time. Lined curtains protect the face and are a common reason to line.
Concede the obvious: for a casual, lightweight line, unlined linen is often the better commercial choice. Lining adds fabric, labour and weight to every panel, and a relaxed, translucent curtain is exactly what some buyers want.
Width: why it matters more than it looks
Fabric width is the least visible spec on a curtain and the one that most often forces a compromise. Many linen looms weave cloth in a narrow width, commonly around 140 to 150 cm (55 to 59 in). A tall curtain or a wide panel is then made from two or more widths of fabric joined by a seam, and on linen that seam shows.
The seam is a real issue for three reasons:
- A vertical seam through a panel is visible, especially in plain or sheer linen where light passes through it.
- Joined widths need matching. Slubs, shade and any pattern repeat have to line up across the join, which costs cloth.
- A seam is a place to fail. It needs a neat finish, and on a heavy panel it carries load.
A wider loom changes the arithmetic. Our cloth is woven in widths to 136 inches (345 cm), so many wide or full-height panels can be cut without a joining seam. That matters most on plain and sheer cloths where a seam would show. It also lets a very tall drop be cut with the weave running the conventional way, instead of turning the cloth sideways (railroading) to avoid a horizontal join, which only works for plain cloth without a directional weave.
| Approach | When it works | Compromise |
|---|---|---|
| Wide-woven cloth, cut as one panel | Plain and sheer linen, wide or tall panels | Needs a loom wide enough, which is not universal |
| Narrow cloth, joined panels | Textured, slubby cloth where the seam hides | Visible seam, extra cutting waste |
| Railroaded narrow cloth | Plain cloth, tall drops | Weave direction runs sideways, not suited to stripes or directional cloth |
For the wider loom background, see Loom Width and Why Seamless Wide Bedding Is Not Universal. The principle is the same for bedding and drapery.
Putting it into a specification
When you brief a manufacturer on a linen curtain, give them these in the first message:
- Cloth weight, with the target hand and whether the curtain is lined.
- Lining construction, face fabric and lining fabric, and whether it is interlined.
- Finished width and drop, heading and fullness. The method is set out in Curtain and Drape Sizes by Market.
- Seam policy: whether a joining seam is acceptable, and where.
- Shrinkage and length tolerance, on face, lining and the finished panel.
- Colour reference and how it will be approved.
To develop curtains in your own cloth, widths and headings, start from curtains and drapes. For the cloth options see our woven programme, and for minimums, sampling and lead times see our private label terms. Counter samples run in about a week on woven goods, which is enough time to judge weight, hang and seam before committing to bulk.
Common questions
What weight of linen is best for curtains?
It depends on the heading and the room. A lighter linen suits sheers and loose headings, and a medium or heavier cloth suits structured pleats and floor-length panels. Choose by the fall you want, then confirm it on a made-up sample hung at full drop.
Should linen curtains be lined?
Lining adds body, protects the face fabric from sun and hides the back of the weave. Unlined linen is lighter, cheaper and more translucent. Neither is universally better; it comes down to the product positioning. Remember that lining is a construction choice, and any light or thermal performance has to be specified and tested separately.
Why do linen curtains have seams?
Because the cloth is often narrower than the panel needs to be. Joining two widths makes a seam that shows, especially on plain linen. A wider woven cloth can remove the join, which is why loom width is worth asking about before choosing a supplier.
Do linen curtains shrink?
Linen can shrink on first wash, and the lining may shrink at a different rate. Agree a tolerance on the face fabric, the lining and the finished panel, and test it on a sample before bulk.