Skip to content
H & J EximHome Textile Manufacturer & Exporter
Back to Buyer Guides

Markets

Linen Table Linen for Restaurants and Hotels: What to Specify

Published

A restaurant or hotel should specify linen table linen by how it will be laundered and handled, not by how it looks on a sample table. Settle the cloth weight and weave, the hem and corner construction, a colour that survives repeated washing, and sizes taken from the tables actually in service. Then order spare stock with the first batch, because hospitality linen is consumed rather than kept. The cloths we weave for the table are set out on the linen table linen and linen-cotton table linen pages.

Why hospitality is a different brief from retail

A retail napkin is judged on a shelf and then washed a few dozen times at home. A restaurant napkin is folded, used, collected, sorted, laundered at high temperature, pressed and returned to service, often several times a week. The cloth is the same fibre, but the failure points are different: hems that open, corners that fray, colour that dulls, and a crisp hand that disappears after a few cycles.

So the specification should start from the laundry, not the table. Ask the operator, or their laundry contractor, how the linen is washed, how hot, whether it is tumble dried or flat pressed, and how often it is replaced. Those answers tell you how much margin the construction needs.

Choosing the cloth

Weight and hand

Hospitality table linen is generally specified heavier than a retail equivalent, because weight carries the crisp fold, the way a cloth hangs over an edge and the resistance to wear. For a general view of how weight changes across products, see our guide to linen weight by product. The practical rule is to agree the target weight on a woven sample, wash it, and judge the hand after washing rather than before.

Weave

Plain weave is the default for napkins and everyday cloths: simple, easy to press and predictable. Dobby and jacquard weaves add a pattern woven into the cloth, such as a small geometric or a border, which suits fine dining and hotel banqueting but makes a cloth more particular about stock continuity, because a reorder has to match the original pattern. Waffle and twill give a more textured surface and are better suited to casual dining or breakfast service than to a formal setting.

Pure linen or a blend

Pure linen is the traditional choice and the one most associated with a refined table. It is also the stiffest to launder and the most prone to creasing. A linen-cotton blend softens the hand, creases less and is often easier on a commercial laundry. If the operator runs a high-volume laundry with little ironing time, a blend can be the more practical specification, and a buyer should say so plainly rather than default to pure linen for appearance. Cotton alone is also reasonable for high-turnover casual service. Our guide to linen-cotton blends sets out what each ratio changes. A polyester blend is the usual answer where cost and no-iron performance outweigh the natural look, and we do not pretend linen is right for every venue.

Construction details that decide how long it lasts

  • Hems. A deeper, firmly stitched hem resists opening through repeated washing. Check that the hem is even and that the stitch ends are secured.
  • Corners. Mitred corners lie flat and look finished, and they are where a poorly made napkin starts to fray. Inspect them on the sample, not just the flat of the cloth.
  • Selvedge and cut edges. On a tablecloth cut from wide cloth, confirm how the long edges are finished and whether any join is needed. Where a tablecloth is wider than the loom, a seam is unavoidable and should be placed deliberately, not left to chance.
  • Edge finishes. Decorative edges, a contrast border or hand-finished detail raise the look of a cloth and the making time with it. They are worth it for a flagship room and rarely for a busy breakfast service.

You can see the range of options on our table linen pages.

Colour in a commercial setting

White and ivory dominate hospitality because they can be bleached and matched when stock is topped up. Coloured linen is increasingly used, but it asks more of the buyer. Deep shades need care in dyeing and washing, and linen of one colour from two production batches can differ slightly. Specify the colour by an agreed reference, request a lab dip, and approve it before bulk. H & J Exim matches to Pantone TCX references and issues lab dips and strike-offs for approval, and our guide to colour matching walks through the approval steps. For a coloured range, order the whole expected quantity together where you can, so the colour is consistent across the stock.

Sizes: measure the tables, then the napkin

Take tablecloth sizes from the tables in service plus the drop you want, rather than from a catalogue of standard sizes. A casual restaurant often uses a short drop that stops above the seat, while a banquet cloth falls much lower. Our guide to table linen sizes by market covers the drop calculation and sizes by market. Our standard dinner-style napkin is 45 x 45 cm (18 x 18 in), and the cocktail napkin is 15 x 15 cm (6 x 6 in). Both are customised to a buyer's own dimensions, and a larger napkin is common in formal service.

Allow for shrinkage in the specification. Linen relaxes in the first washes, so a cloth cut to its finished size without allowance will come back from the laundry slightly smaller. See our guide to linen shrinkage for the tolerance to write into the order.

Quantity, par stock and reorders

Hospitality linen is bought in par levels: the number of sets needed to cover what is on the tables, in the laundry and on the shelf. A common working assumption is several sets per table position so service never waits on the laundry, but the correct multiple depends on the laundry turnaround of each venue. Confirm it with the operator before you set the order.

Our minimum order starts from 50 pieces, set per quality and per colourway rather than per size, and from 100 pieces for woven goods, so a smaller venue or a trial can be supported. Order spare stock with the first batch. Linen reordered a year later can differ slightly in shade from the original, so a buffer saves a mismatch in the same dining room.

Samples and what to check before bulk

For woven goods we usually turn around counter samples in about one week from an agreed specification. Samples are chargeable and adjusted against the first bulk order. Bulk production starts from 60 days FOB after sample approval, and shipping terms are FOB Nhava Sheva, with CIF and CFR available on request.

When the sample arrives, do more than look at it:

  1. Wash it the way the venue's laundry will, then press it.
  2. Measure it before and after washing.
  3. Check the hems and corners after washing, not only before.
  4. Compare the shade against the approved reference in daylight and in the dining-room lighting.

If you are building a hospitality programme, contact us with the table sizes, quantities and laundry method and we will respond within one to two business days. The wider private label page sets out minimums and sampling.

Common questions

What weight of linen is best for restaurant napkins?

There is no single correct figure. Heavier cloth holds a fold and tolerates repeated washing better, while a lighter cloth has a softer hand. Agree a target on a woven sample, wash it, and choose on how it behaves after laundering.

Is pure linen always better than a blend for hotels?

No. Pure linen has the traditional look but creases and stiffens more, and it can be harder on a busy laundry. A linen-cotton blend is often the more practical choice for high-turnover service.

How many napkins should a restaurant order?

Order by par level: enough sets to cover the tables in service, the laundry and a reserve. The multiple depends on the laundry turnaround, so confirm it with the venue, and order spare stock with the first batch.

Can table linen be made to a custom size?

Yes. Napkins and tablecloths are made to the buyer's dimensions, so give us the table sizes and the drop you want.

Ready to talk about your programme?

Share your brief, tech pack or reference sample and we will come back to you within 1 to 2 business days.

Designs ready?Request a direct quoteSend your tech pack, sizes and quantities in one go. Quote within 2 business days.