Sourcing
Choosing Between a Woven and a Knitted Programme for a New Line
Published
Choose woven for products that must lie flat, hold a crisp edge or take daily laundering, such as sheets, duvet covers, table linen and curtains. Choose knitted for products sold on softness, stretch and texture, such as throws, cable-knit layers and tubular-knit coverlets. Most new lines do not need to pick one for good: start with the construction that suits the hero product, and add the other once the first has sold through.
What actually differs between the two
Woven cloth is made on a loom by interlacing two sets of yarn at right angles. Knitted cloth is made by looping a continuous yarn into rows of interlocking stitches. That one difference drives almost everything a buyer cares about.
| Point | Woven | Knitted |
|---|---|---|
| Structure | Warp and weft interlaced | Interlocking loops |
| Stretch | Little, except on the bias | Gives in both directions |
| Handle | Crisp to soft, depending on yarn and finish | Soft, bulky, springy |
| Edge | Hemmed or fringed | Often finished by the knitting itself |
| Drape | Falls in clean folds | Moulds and slumps |
| Typical home textile use | Sheets, duvet covers, pillowcases, table linen, curtains, cushion covers | Throws, blankets, cushions with a textured face, coverlets |
| Pattern method | Weave structure (plain, twill, dobby, jacquard), print, embroidery | Stitch pattern (cable, Fair Isle, intarsia), colour in the yarn |
Neither is better in the abstract. The right question is which one the finished product has to behave like.
Start from the product, not the machine
Where woven is the natural answer
Anything with a precise size and a fitted or tailored function is a woven product. A fitted sheet has to sit on a mattress of a known depth, a flat sheet needs a clean hem, a duvet cover needs buttons and corner ties to hold a duvet in place, and a tablecloth needs to hang evenly. Woven cloth holds a measured shape, and the rest of the construction is built on that.
Woven also carries the widest range of fibres and weaves in the home. Plain, twill, herringbone, waffle, dobby, jacquard and matelassé are all woven structures, and they let a buyer change the look of a product without changing the fibre.
Where knitted is the natural answer
Knitted wins where softness and give are the selling point and a precise rectangle is not. A throw is judged by how it feels over a lap and how its stitch pattern looks on a sofa. A knitted cloth does not crease the way a woven one does, and a stitch pattern such as cable or Fair Isle gives a surface that a woven cloth can only imitate.
Standard knitted throw sizes in the trade are 50 x 60 inches and 60 x 80 inches (127 x 152 cm and 152 x 203 cm), and H & J Exim makes throws at both. Tubular-knit coverlets are another knitted product, that sit as a light layer over bedding.
Where the two overlap
Cushions, throws and coverlets can be made either way. A woven throw in herringbone or waffle reads as tailored and light; a knitted throw in cable reads as chunky and cosy. A cushion can have a woven jacquard face or a knitted cable face. In these categories the choice is a design decision, not a technical one, and a buyer should ask for both in the first sampling round if the range is undecided.
What the choice changes in the order
Minimums
Minimums are set per quality and per colourway, not per size. H & J Exim's minimum is from 50 pieces overall, which means from 50 pieces for knitted and from 100 pieces for woven. That lower knitted threshold is useful for a new brand testing a single throw design, though a very small first run still carries a higher cost per piece than a larger one, as it does in any factory.
Sampling
Counter samples take about one week on woven and about 10 days on knitted, from an agreed specification. Samples are chargeable and adjusted against the first bulk order. Plan your approval calendar around the longer figure if the range mixes both.
Production and shipping
Bulk production starts from 60 days FOB after sample approval, with shipping FOB Nhava Sheva as standard and CIF or CFR available on request. Whether a range is woven, knitted or both, the buyer should ask for the production slot to be confirmed in writing against the actual quality and quantity, not against a general figure.
How to decide for a new line
- Name the hero product. The first product defines the programme. A sheet set means woven; a throw means knitted or woven.
- Check the price point and the shelf. A brand that sells soft goods at gift price points may find a knitted throw a lower-risk first line than a full bedding set with several sizes.
- Count the sizes. A woven bed set multiplies across sizes and market formats. A throw is usually sold in one or two sizes, so the specification is shorter.
- Check the care instructions. Woven goods generally take repeated hot laundering. Knitted goods often need gentler care, and the label has to say so.
- Plan the second step. Knitted throws sit well beside woven bedding in a seasonal range, so a brand can launch on one and add the other, using the same supplier relationship and the same colour approvals.
Concede one point: if a buyer only wants a very small set of identical rectangular woven items at the lowest conversion cost, a specialist woven mill may serve them as well as a supplier that runs both. Running both matters when a range needs to span categories.
Running both programmes with one supplier
A supplier with its own looms and its own knitting machines can sample both constructions in the same colour palette. H & J Exim offers Pantone TCX colour matching, with lab dips and strike-offs for approval, so a woven duvet cover and a knitted throw can be matched to one reference. That matters for a coordinated look on a shelf or in a photograph. Terms for both programmes are on the private label page, with the woven range at /woven and the knitted range at /knitted.
Common questions
Is knitted or woven cheaper to start with?
Neither is cheaper in every case. Knitted has the lower minimum here, from 50 pieces against from 100 for woven, which can make a first trial smaller. Cost per piece depends on fibre, weight, construction and quantity, so ask for quotes on both for the same finished product.
Can I sample both at the same time?
Yes. Counter samples run in about one week on woven and about 10 days on knitted, so a mixed sample request is ready on the longer timeline. Samples are chargeable and adjusted against the first bulk order.
Which is better for bedding?
Woven, for sheets, duvet covers and pillowcases, because they need a precise size and a fitted or hemmed construction. Knitted suits the layers added on top, such as throws and tubular-knit coverlets. Questions on a specific range can go through the contact page.