Fabrics
Chenille and Velvet in Home Furnishing: Handling and Specification
Published
Chenille and velvet are both soft, dense fabrics, but they get that softness differently: chenille from a special yarn with a fuzzy pile along its length, velvet from a woven pile surface that is cut and stands upright. The practical difference for a buyer is that both are directional and both mark easily, so the specification has to cover pile direction, cutting, sewing and packing, not just fibre and colour.
How each cloth is built
Chenille is a yarn before it is a fabric. A core of fine threads holds short lengths of pile fibre sticking out on all sides, so the yarn looks like a caterpillar, which is where the name comes from. That yarn is then woven (or knitted) like any other. The pile is in the yarn, so the surface looks soft and slightly irregular, with a hand that is plush rather than sleek.
Velvet is a cloth feature. Extra pile warp or weft threads are woven in, raised into loops and cut, leaving a short, even, upright pile on a woven base. The surface is smooth and reflects light differently depending on which way you look at it, which is why velvet seems to change shade between angles.
| Chenille | Velvet | |
|---|---|---|
| Where the pile comes from | The yarn itself | A cut pile woven into the cloth |
| Surface | Soft, textured, a little irregular | Smooth, even, light-catching |
| Directional shading | Mild | Pronounced |
| Typical use | Cushions, throws, upholstery, coverlets | Cushions, curtains, upholstery, bed-ends |
| Main handling risk | Pile shedding and snagging | Crushing, marking, shading |
Both can be made in cotton, linen-blend and other fibre bases, and the fibre matters as much as the pile style. Both are offered on H & J Exim's woven programme.
Pile direction is a specification point
Velvet in particular has a nap. Brush it one way and it looks darker and richer; brush it the other and it looks paler. If two panels of a cushion cover are cut with the nap running in different directions, the shade difference looks like a dye fault, even though the dye is identical.
So write the rule down for the factory:
- All pieces in a single product are cut with the pile running the same way.
- The direction is stated against the finished product, for example pile running down on a curtain or up on a cushion front.
- Pieces are laid out in a single direction on the cutting table rather than rotated to save fabric.
The cost of this rule is fabric yield, because one-way cutting wastes more cloth than free rotation. A buyer who wants the best price on a pile fabric is asking the factory to rotate pieces, and should know what that does to the finished look.
Chenille is more forgiving but not immune, and a one-way instruction costs nothing to include.
Cutting, sewing and finishing
Pile fabrics behave differently from flat weaves at every stage.
Cutting. Pile fabric is slippery against itself, so layers shift. Fewer layers per lay, sharp blades and notches that survive the pile are standard practice. Cutting threads shed fibre, which is why clean floors and lint control matter.
Sewing. Two layers of pile can creep against each other under the presser foot, so seam edges end up misaligned. Pile-friendly feet, a longer stitch and more thread tension control help. Chenille can pull and snag on a needle; velvet can leave needle marks that do not close up again, so the seam line and the needle size are worth agreeing at the sample stage.
Seams. Chenille, where the pile is a short fibre, can open at a seam and shed. Overlocked or enclosed seams and a sound hem allowance reduce this.
Edges. Flat finishes such as piping, flange or a contrast border are common choices on cushions, because they stabilise the cut edge and give the eye something other than the pile to land on.
Pressing. Do not iron pile fabric flat. Pressing from the back, or steaming, is the usual method, and a production floor that irons velvet face down will crush the pile permanently.
Packing and storage
Crushing is the main complaint on velvet and chenille arriving from a factory. A pile that has been folded tight and compressed under a carton stack for weeks can show crease lines that never fully lift.
Specify:
- Cartons that are not packed to the point of compression.
- Folding along the least visible line, or rolling where the product allows.
- Individual polybags per piece, not bulk wrapping.
- A maximum carton stack height, and "do not crush" cartons marked on the outer.
None of this is expensive, but it has to be written in the packing instruction, because a default pack for flat woven bedding is not the right pack for pile.
What to write into the spec
A buyer sending a pile fabric request should include:
- Fibre and base. Cotton, linen blend or another base, since this governs hand, wash behaviour and cost.
- Construction. Chenille or velvet, and for velvet whether the pile is cut or looped.
- Pile direction on the finished product.
- Colour reference. A Pantone TCX reference or a physical swatch. Pile fabrics photograph differently from flat ones, and a lab dip on the actual cloth is the only reliable check.
- Rub and pilling expectations, stated as a test method and a result your market asks for. Do not leave this to "good quality".
- Care label. Pile fabrics do not all wash the same way. State dry clean, spot clean or washable, and test to the care claim you are putting on the label.
- Packing instruction as above.
Where a pile fabric is going on a cushion, a throw or a coverlet, it is worth asking for a counter sample before bulk. Counter samples run about a week on woven goods from an agreed specification, and a pile fabric tends to show its faults in the sample.
When a different choice is better
Pile fabrics are not for every programme. A chenille or velvet cushion cover is a good fit for a styled, design-led range. For a hospitality order where covers are laundered often and hard, a flat weave in a tight construction will outlast most pile fabrics, and a buyer who needs that should say so early. A pile fabric with high rub and wash demands is possible, but it narrows the choice of base fibre and construction, and the conversation is easier before the sample than after.
For minimums, sampling and lead times, see private label. For the range of cloths we weave, see the woven programme and products. To discuss a specific pile fabric, contact us.
Common questions
Is chenille or velvet harder to produce?
Velvet is usually less forgiving. Its directional shading and its tendency to mark under pressure mean mistakes are visible on the finished piece. Chenille hides small irregularities better, though it can shed and snag.
Can both be made to a custom colour?
Yes, in principle, with a lab dip or strike-off approved on the actual cloth. H & J Exim matches to Pantone TCX references, and a pile fabric should be approved on a swatch of that fabric, not a flat one, since the pile changes how colour reads.
What minimum should I expect?
H & J Exim's minimum is from 50 pieces, set per quality and per colourway rather than per size, and from 100 pieces for woven goods. Confirm the figure against your exact quality when you request a sample.